Warm White Double Vanity Vanity Units
Category · Bathrooms
Bathrooms made to order for UK projects.
Vanity units, bathtubs, basins, WCs and brassware manufactured to order in Foshan — specified to your drawings, matched across every bathroom in the scheme, and delivered as part of one coordinated building-material package.
Made to measure in Foshan · Supply only to UK projects · Coordinated as one order
Overview
Bathrooms from our Foshan lines
We work from your drawings, BOQ or schedule of accommodation. Where a detail is unresolved, we raise it as a question — not an assumption. Samples of finishes are provided for approval before production.
Because every category is made under the same roof, bathrooms can be coordinated with the rest of your fit-out in a single order — finishes matched, deliveries consolidated, one team accountable for the whole package.
Compliance note: UK regulatory and certification requirements (for example UKCA, fire performance or formaldehyde emissions) depend on the exact product configuration. Tell us your project requirements and we will confirm what applies — we do not publish blanket compliance claims.
Full bathroom range
View the full bathroom range
All 39 bathroom range references remain available below and can be specified and combined into one coordinated package.
BV-01
Oak & Travertine Floating Vanity
Oak drawer unit under a travertine top with wall-mounted brass taps.
BV-02
Curved Travertine Vanity
Curved fluted base with an integrated travertine basin and backlit mirror.
BV-03
Dark Walnut Freestanding Vanity
Freestanding walnut unit with a black marble top and turned legs.
BV-05
Classic Cream Framed Vanity
Traditional cream framed vanity with a marble top and tapered legs.
BV-07
Stone Basin on Walnut Vanity
Carved stone vessel basin set on a solid walnut drawer unit.
BV-08
Walnut Double Vanity with Stone Top
Walnut fluted fronts, a thick stone top and a lit towel shelf.
BV-09
Sculpted Marble Floating Vanity
Solid marble floating vanity with a rounded profile and integral basin.
BV-10
Matte White Oval Freestanding Bath
Flared oval bowl in a smooth matte white with a floor-standing mixer tap.
BV-11
Matte Black Oval Freestanding Bath
Deep matte black bowl that anchors dark marble and walnut schemes.
BV-12
Sleek White Oval Freestanding Bath
Clean-lined oval bowl in a bright white for calm, minimal bathrooms.
BV-13
Sculpted Slipper Freestanding Bath
Asymmetric slipper profile with a raised back and a smooth white finish.
BV-14
Marble-Effect Oval Freestanding Bath
Oval bowl wrapped in a bold grey-veined marble effect with a brass floor-standing tap.
BV-15
Compact Oval Freestanding Bath
Neat white oval bowl that sits comfortably against grey stone tiling.
BV-16
Boat-Shaped Sculpted Bath
Sculpted white bowl with upswept ends and a brass floor-standing tap.
BV-17
Terracotta Oval Freestanding Bath
Warm matte terracotta finish that pairs with plaster and fluted-timber walls.
BV-18
Organic Sand-Tone Freestanding Bath
Twisted sculptural form in a warm sand tone for statement bathrooms.
BV-19
Travertine Vessel Basin
Round stone bowl in warm travertine tones with a wall-mounted brass tap.
BV-20
Matte Charcoal Oval Countertop Basin
Low oval bowl in a smooth matte charcoal for dark marble counters.
BV-21
Gloss White Oval Countertop Basin
Wide gloss white bowl set on a timber worktop with a brushed wall tap.
BV-22
Blush Pink Fluted Basin
Ribbed blush-pink bowl that echoes fluted vanity fronts and brass fittings.
BV-23
Chiselled Stone Vessel Basin
Oval bowl with a rough-hewn outer face for rustic timber washstands.
BV-24
Grey Stone Double Trough Basin
Twin integral bowls in a grey stone finish with wall-mounted brass taps.
BV-25
Fluted Column Freestanding Basin
Cylindrical matte white pedestal bowl with fluted sides for cloakrooms.
BV-26
Speckled Stone Round Basin
Softly rounded vessel bowl in a speckled sand finish, tapped from the wall.
BV-27
Pale Travertine Bowl Basin
Wide bowl in pale travertine tones beneath a tall brushed brass mixer.
BV-28
Shallow White Oval Basin
Low, wide gloss white bowl with a soft oval rim for timber vanities.
BV-29
Textured Glass Vessel Basin
Clear hammered-glass bowl with a chrome tap for polished stone counters.
BV-30
Matte Cream Round Basin
Soft-edged round bowl in a warm matte cream with wall-mounted brass taps.
BV-31
Matte Black Back-to-Wall WC
Smooth skirted pan in a deep matte black for dramatic dark schemes.
BV-32
Square Close-Coupled WC
Contemporary close-coupled format with a slim square cistern.
BV-33
Sleek Back-to-Wall WC
Gloss white pan with a concealed cistern and a discreet side flush button.
BV-34
Wall-Hung WC with Brass Flush Plate
Floating pan set against marble with a brushed brass flush plate above.
BV-35
Back-to-Wall WC with Round Flush Button
Compact white pan operated by a round wall-mounted flush button.
BV-36
Rounded Back-to-Wall WC
Softly curved white pan for calm, spa-like bathroom schemes.
BV-37
Slimline Back-to-Wall WC
Tapered white pan with a narrow footprint for tighter bathroom plans.
BV-38
Smooth Back-to-Wall WC
Rounded pan with a seamless skirted profile for minimal interiors.
BV-39
Sculpted White WC
Sculpted one-piece pan in gloss white for marble-clad bathrooms.
Case study · Bathrooms
From a floor plan to this complete bathroom order
This factory record follows order 27430 across three visible bathroom lines: jacuzzi baths, shower glass and WCs. The images show dimension checks, production-floor inspection and a WC unit staged beside export cartons before shipment.
Project highlights
| Project type | Factory QC record |
|---|---|
| Order scope | Jacuzzi baths, shower glass and WCs |
| Visible materials | Jacuzzi bath, shower glass and WCs |
| QC evidence | Measured glass, visible fittings and staged bathroom products |
How this order ran
- Drawing confirmationShower-glass dimensions are checked with a tape measure before the parts move on.
- Factory productionJacuzzi baths, shower glass and WCs are shown on the factory floor at different production stages.
- Per-item QCBath controls, glass fittings and individual WC pieces are checked as separate items.
- WC export packingA WC unit is staged in front of export cartons, while glass fittings are bagged and labelled for the export package.
FINISHES & OPTIONS
A sample of what's possible
Explore a focused selection of vanity units, baths, basins and WCs. Each reference can be specified as part of one coordinated bathroom package.
Natural Oak Open-Shelf Vanity Vanity Units
Dark Walnut Four-Drawer Vanity Vanity Units
Compact Greige Floating Vanity Vanity Units
Sculptural Oval Freestanding Bath Bathtubs
Rectangular Back-to-Wall Bath Bathtubs
High-Back Slipper Bath Bathtubs
Compact Asymmetric Corner Bath Bathtubs
Round Countertop Basin Basins
Rectangular Ivory Countertop Basin Basins
Double Rectangular Vessel Basin Basins
Sculptural Asymmetric Basin Basins
Wall-Hung WC WCs & Fittings
Close-Coupled WC WCs & Fittings
Rimless Back-to-Wall WC WCs & Fittings
Contemporary Bidet WCs & Fittings
Specification guide
Typical configurations, then made to order
The matrix below shows the usual starting points for this category. Every project is produced to confirmed drawings — use it to frame your enquiry, not as a fixed catalogue.
| Element | Usual options | Notes |
|---|---|---|
| Carcass | Moisture-resistant board, 16–18 mm, edge-banded | Built for humid rooms |
| Front | Lacquer, veneer, laminate or timber | Matched to the broader scheme |
| Top | Stone, ceramic or solid surface | Coordinated with the basin and finish |
| Hardware | Soft-close hinges and runners as standard | Matte black, gold, gunmetal or chrome |
| Configuration | Made-to-measure widths, heights and depths | Cut from confirmed drawings, not a fixed range |
| Packing | Foam-wrapped or crated | Export crating for consolidated container loads |
| Bathtub | Acrylic or stone resin, freestanding or built-in | Specified to scheme drawings |
| WC | Wall-hung or close-coupled, concealed cistern options | Matched across all units in the scheme |
| Brassware | Taps, wastes, mixers in coordinated finishes | One finish schedule per project |
Certification & compliance
The certificate pack for this category is shared with every enquiry — ask for current documents.
-
UKCA Marking -
CE Marking -
FSC Certified - E1 E1 Emission Class
- WRAS WRAS Approved
Ordering
How an order for bathrooms runs
Four stages, each one documented. Programme and cost follow scope — materials, volume, finish complexity and shipping window — so we quote per project rather than publishing fixed figures.
01
Send drawings & BOQ
Drawings, a BOQ or a room schedule — enough for a consolidated quotation.
We need: plans + rough quantities02
Samples & sign-off
Physical finish samples ship with the confirmed order; production starts only after approval.
We need: a named approver03
Production, QC & packing
Staged inspections with photo records, then export-grade packing for the sea journey.
We need: your QC checkpoints04
Consolidated UK delivery
One documented load, customs paperwork prepared in advance, against your programme.
We need: site access & offload planMade-to-order bathrooms from a China manufacturer, coordinated for UK schemes
Bathrooms are among the most repeated rooms on a UK development — the same layout and fittings, multiplied across flats, hotel floors, student blocks or care schemes. Buying them made to order means every bathroom follows the architect's schedule rather than a fixed retail range: exact dimensions, one fixture set and one finish standard across dozens of identical rooms.
George Group manufactures bathroom packages to order in Foshan, China — vanity units, bathtubs, basins, WCs and the matching brassware. The vanity designs and product photographs on this page show the range we produce; your scheme is manufactured to your own drawings, not to a picture.
Specified, sampled, then produced
Every order starts from your drawings, BOQ or bathroom schedule. We propose sanitaryware, vanity construction, brassware and finishes to match the specification, issue production drawings for sign-off, and send physical samples for approval before manufacturing begins. Vanity carcasses are built with moisture-resistant board for humid rooms, and we supply WRAS-approved brassware options alongside UKCA and CE marking — certificates are available to your project team at quotation stage.
One matched set per bathroom, one shipment per project
The real saving for a UK project is coordination. When bathrooms are ordered alongside kitchens, doors or fitted storage, the same team manages materials, production and packing together — one QC pass, one export-packed consignment, one point of contact. The factory photographs below show a recent bathroom order during quality checking and export packing; the video further down shows our sanitaryware in production and on display.
Send your drawings or BOQ and we will come back with a coordinated specification and quotation for sign-off.
Why George Group
Why specify us for bathrooms
20+
Years of manufacturing experience
50+
Countries & regions served
30,000 m²
Showroom for the full material range
2,000+
Employees at George Group serving projects worldwide
Visit us
Walk the showroom, see your bathroom come together
Explore bathroom suites, vanity finishes and sanitaryware in the showroom, then see how wall surfaces, fittings and cabinetry work together as one coordinated scheme. For remote clients, staged photo and video records keep each specification visible from approval to dispatch.
- Bathroom suites
- Vanity finishes
- Sanitaryware details
- Export-ready packing
Common questions
Asked about bathrooms
Can you match a UK designer's specification?
Yes. Send the specification or drawings and we will propose equivalent sanitaryware, vanity units, brassware and finishes — with physical samples for sign-off before production, so what arrives on site is what the design intent called for.
Do your fittings meet UK water regulations?
We supply WRAS-approved brassware options and configure fittings per project toward WRAS-recognised components where the specification calls for them, alongside UKCA and CE marking. The exact compliance route is confirmed against your project requirements at sample sign-off, and certificates can be shared at quotation stage.
Do you deliver to UK sites?
Yes. Bathrooms are consolidated with the rest of your building-material order and shipped to the UK as one consignment. Delivery terms and programme are agreed per project at quotation stage.
What is the minimum order?
Our model suits project-scale orders rather than single retail bathrooms — a multi-unit residential scheme, a hotel floor or a serviced-apartment block all fit well. Tell us the scheme size and we will confirm fit.
How do we choose between basin types for a bathroom scheme?
We can specify countertop, undermount or integrated basins depending on the look and maintenance you want, and provide samples so the choice is signed off before production. The basin type is set from your drawings alongside the carcass and tap specification.
How are bathroom components prepared for damp conditions?
We discuss board choices and edge treatments suited to humid rooms as part of the specification, so the construction matches the bathroom's exposure. Exact material ratings are confirmed against your project requirements rather than published as a general claim.
Can bathtubs, WCs and vanities ship in one order?
Yes. Bathtubs, basins, WCs, vanity units and the matching brassware are produced as one coordinated package, packed together and shipped in the same consolidated load as the rest of your order.
What if a component needs replacing later?
We keep production records by project and can supply matching sanitaryware, vanity units, taps and fittings to the original specification. Replacement terms are confirmed per order; we do not imply a UK-based stock or service team.
Tell us what your project needs.
Send a list, a drawing or even a photo — a dedicated coordinator replies with next steps and a consolidated quote.